Single/Dual Beam, 20/60 Degree, 200/83 kHz, 20' Cable. More secure, especially at high force of waves. Improved running angle and an optional lock down screw to override the kick up. The Humminbird XNT 9 20 Transom Mount Transducer is a high-speed transducer designed to mount on the transom, or back, of the boat, in contact with the surface of the water, and operate in conjunction with a compatible Humminbird sonar or fish finder system. This unit is a single and DualBeam transducer that features 20- and 60-degree cone angles operating on 200 kHz and 83 kHx frequencies respectively. The XNT 9 20 includes a 20-foot cable, and all the necessary high-speed hardware to get up and running right away. Although this unit has the same hole pattern as some older-version transducers, it utilizes a new design that is more secure and less prone to kick up at the high force of waves, as well as having an improved running angle, and an optional lock-down screw to override the kick up. The Humminbird XNT 9 20 transducer is specifically designed for use with Humminbird's; Matrix 10, 12, 15, 17, 20, 27, 67, 77c, 87c, 97, 717, 727, 737, 767, 777, 787, 323, 343, 363, 383, 141, 161, PMax10, PMax15, PMax20, PMax210, PMax215, PMax220, 917c, 931c, 937c, 957c, 997c, 515, 525, 535, 565,580, 585c, 595c, Piranha 2, Piranha 4, XP2000, XP4000, and HDR610 sonar devices and fish finders. This transducer is backed by Humminbird's one-year limited warranty.
System Sensor CO1224T Carbon Monoxide Detector with RealTest
Manufacturer: System Sensor
Brand: System Sensor
With RealTestTM technology, the CO gas sensing cell used in the
CO1224T and CO1224TR CO detectors can be tested using a CO gas
agent, fully meeting the requirements of NFPA 720: 2009. Simply put
the detector into RealTest mode, spray a small amount of CO into
the detector per the installation instructions, and within seconds the
detector will alarm, indicating successful gas entry. (See the reverse
page or the user manual for complete instructions.)
When dangerous amounts of CO are detected, the CO1224T and
CO1224TR detectors alert residents by sounding and flashing a
temp 4 signal alarm. With 24/7 central station monitoring, residents
are guaranteed protection whether they are away from home,
sleeping, or already suffering from the effects of CO.
The CO1224T and CO1224TR are designed for system operation.
These detectors are fully listed to UL 2075 and offer a code-required
trouble relay to send a sensor failure or end-of-life signal to the
control panel and the central station. The CO1224T and CO1224TR
also use SEMS-type terminal Philips head screws for quicker
and more positive wiring connections and code-required wiring
supervision. With a low current draw, these detectors enable more
devices to be connected to the panel, limiting the need to purchase
extra power supplies or more expensive panels. As 12/24 VDC
detectors, the CO1224 will operate on most industry security and fire alarm control panels
Puck transducers mount to the inside of most fiberglass hulls and transmit the sonar signal through the hull. The hull must be of single layer fiberglass construction. (Cored fiberglass, metal or wood are not acceptable) and be free of trapped air and voids. The transducer is glued in with slow cure epoxy.15ft cable and epoxy included. This model will work Matrix 10, 15, 17, 20, 25, 27, 55, 65, 67, 77c, 87c, 97; Piranha 1**, 2**, 3*, 4*, 5*; PiranhaMAX 210*, 215*, 220*, 230pt*; Fishfinder 515, 525, 535, 565, 580, 585c, 595c; 931c, 937c; 323, 343c, 363, 383c; 717, 727, 747c, 757c, 767, 777c, 787c; 917c The Humminbird XP 9 20 Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees, and transmit the sonar signal through the hull itself. Your boat's hull must be of single-layer, fiberglass construction and be free of trapped air or voids in order for a puck transducer to operate correctly, so cored fiberglass, metal and wood will not work. This unit is meant to be glued to your inner hull with a slow-cure epoxy, which is included, and connects to your compatible Humminbird sonar or fish finder system via the included 15-foot cable. The Humminbird XP 9 20 is a single/dual puck transducer and is designed to be used with Humminbird's; Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, and FF565. This item is backed by Humminbird's one-year limited warranty.
Black Powder Coated Aluminum Frame 1/8" or 1-1/2" Reversible Clamp Ring Classic Look CRL Custom Van Portholes give vans a classic look. They install with a 1/8-inch (3 millimeter) or 1-1/2 inch (38 millimeter) reversible clamp ring. Their black powder coated aluminum frames yield a professionally installed look. In addition to the Round Porthole Window, CRL offers the Left Hand Parallelogram and Right Hand Parallelogram van window designs which also are available with 31% dark tinted tempered glass. Outside Dimension: 11-3/4 in (298.5 mm) Cut-Out Dimension: 10-1/2 in (266.7 mm) Flange Distance to Edge: 5/8 in (15.9 mm) WARNING: These windows are not for retrofit applications. FOR NEW INSTALLATION ONLY
"Watt's Up" RC Watt Meter & Power Analyzer WU100 Version 2 --- SALE!
# Voltage 0-60 V, resolution 0.01 V. That's a 14 cell series li-poly pack!
# Current 0-100 A peak, 50 A continuous, resolution 0.01 A
# Charge 0-65 Ah, resolution 0.001 Ah. That's ~32 Amps for two hours!
# Power 0-6500 W, resolution 0.1 W. That's ~8.7 Horsepower!
# Energy 0-6500 Wh, resolution 0.1 Wh.
# Operates from 4.0-60 V, 0 V with optional receiver battery pack
# 16 x 2 STN LCD display
# Powerful, 8 MIPS micro-controller
# Color: Electric blue or green
Specially designed for RC Battery Packs to help you:
# Set speed control cutoff voltages and currents
# Tune performance by comparing different setups of pro-peller, motor, gearing, speed control and battery
# Measure a full battery charge and compare to spec when charger claims done
# Check peak currents are safe for battery, speed control, motor, wiring and connectors
# Predict airplane flight time based on ACTUAL conditions in your model
# Check battery capacity and health and whether battery should be retired
# Verify that the minimum voltage under load is within specifications
# Check for wiring and connector power losses.
# Measure power and energy consumption of ANY device with a rechargeable battery pack, such as
# Airsoft gun battery pack
# Bike lighting battery pack
# E-bike and Scooter battery pack
# Combine the power analyzer together with our 2.4V - 7.2V, 7.2V - 12V, 24V NiMH universal smart chargers , and with 3.6V - 14.8V Li-Ion battery charger It is perfect tool to monitor battery pack's performance
Note: In order measure the capacity of battery pack in charging condition, the battery pack must be discharged fully before measureing. For the battery pack stored for longer time, you need 3 - 5 cycle's charging and discharging to get full capacity.
We don't suggest you to use the meter to judge battery nominal capacity, becuase usually nomimal capacity is measured by IEC standard at 0.1C charging and discharging current.
ParkPower By Marinco RV 30 Amp Right Angle Locking Cordset. Grip Lock handle design for easy hook-up and correct blade alignment with inlet, even in darkness. Super flexible 10/3 cable. Watertight molded plug and connector ends. High quality construction. Includes threaded ring and Easy Lock ring. 30 Feet long.
Dynamat 11103 Dynaliner 32" x 54" x 1/2" Thick Self-Adhesive Sound Deadener
Dynaliner is the perfect ultra-lightweight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available on a single layer synthetic foam-type material. Dynaliner isn't affected b
Thrustmaster MFD Cougar Pack Flight Control Panels
2 Multifunctional Usb Cockpit Panel Replicas Of The U.S. Air Force F-16 Mfd; Backlighting For Buttons With Adjustable Intensity (Via The Software Or Manually); 20 Buttons + 4 Switches Per Mfd = 48 Programmable Controls In Total; 2 Programmable Leds Per Mfd To Identify The Mfd During Programming; Multi-Position, Weighted, Non-Slip & Detachable Base; Multifunction Display; 2 Plexiglas Windows Per Mfd To Insert 1 Of The 3 Pre-Printed Cardboard Layouts With Presets For Microsoft Flight Simulator X; Compatible With All Flight Simulation Games (Military Or Civil) Supporting Multi-Usb; Includes Cd With Plug & Play Presets For Microsoft Flight Simulator X & Microsoft Flight Simulator 2004