"Watt's Up" RC Watt Meter & Power Analyzer WU100 Version 2 --- SALE!
# Voltage 0-60 V, resolution 0.01 V. That's a 14 cell series li-poly pack!
# Current 0-100 A peak, 50 A continuous, resolution 0.01 A
# Charge 0-65 Ah, resolution 0.001 Ah. That's ~32 Amps for two hours!
# Power 0-6500 W, resolution 0.1 W. That's ~8.7 Horsepower!
# Energy 0-6500 Wh, resolution 0.1 Wh.
# Operates from 4.0-60 V, 0 V with optional receiver battery pack
# 16 x 2 STN LCD display
# Powerful, 8 MIPS micro-controller
# Color: Electric blue or green
Specially designed for RC Battery Packs to help you:
# Set speed control cutoff voltages and currents
# Tune performance by comparing different setups of pro-peller, motor, gearing, speed control and battery
# Measure a full battery charge and compare to spec when charger claims done
# Check peak currents are safe for battery, speed control, motor, wiring and connectors
# Predict airplane flight time based on ACTUAL conditions in your model
# Check battery capacity and health and whether battery should be retired
# Verify that the minimum voltage under load is within specifications
# Check for wiring and connector power losses.
# Measure power and energy consumption of ANY device with a rechargeable battery pack, such as
# Airsoft gun battery pack
# Bike lighting battery pack
# E-bike and Scooter battery pack
# Combine the power analyzer together with our 2.4V - 7.2V, 7.2V - 12V, 24V NiMH universal smart chargers , and with 3.6V - 14.8V Li-Ion battery charger It is perfect tool to monitor battery pack's performance
Note: In order measure the capacity of battery pack in charging condition, the battery pack must be discharged fully before measureing. For the battery pack stored for longer time, you need 3 - 5 cycle's charging and discharging to get full capacity.
We don't suggest you to use the meter to judge battery nominal capacity, becuase usually nomimal capacity is measured by IEC standard at 0.1C charging and discharging current.
Manufacturer: BOSS AUDIO
Brand: BOSS Audio
view larger What is a Capacitor? A capacitor is a passive (it consumes, but does not produce, energy) two-terminal electrical component. In building a sound system for your car, you would want to use a capacitor for a couple of different reasons. Why Do I Need One? The main reason a capacitor is always recommended is for power reserve. The capacitor stores energy and releases it very quickly to the amplifier(s). How Does This Help? Music is dynamic, no matter what type you listen to, and the dynamics can vary quickly, going from soft voices to thundering bass notes. These moments are where the benefit of having a capacitor is heard. The amplifier requires a constant amount of steady power to function efficiently and power the speakers. A capacitor will keep the power going to the amplifier consistent and stabilized, which means a better-sounding system. Important: The remote output of the head unit is connected to the remote turn on of the capacitor. The capacitor will not function if the remote wire is not connected to your head unit. Specifications Model 2 Farad 3.5 Farad 4 Farad 8 Farad 30 Farad Color Dimensions (L x W x H) CAP2B • Black 3" x 3" x 10.30" CAP3.5B • Black 4" x 4" x 11.37" CAP3.5S • Silver 4" x 4" x 11.37" CAP4C • Chrome 4" x 4" x 11.37" CAP8 • Black 9" x 6" x 2" CAP30 • Black 11.38" x 7.25" x 3" What's in the Box One pair of mounting brackets 2 ring terminals 2 spade terminals Mounting screws 1 resistor 1 Allen wrench Instructions Installation Power up procedures Power down and removal
PAC AAI-CHY Dual Auxiliary Audio Input For 2005+ Chrysler Vehicles
Manufacturer: Parkway Business Promotions
Integrates two auxiliary audio sources directly to the factory radio for the highest possible sound quality. Ideal for MP3 players, portable DVD players, handheld GPS, laptops and gaming systems. Compatible with REF, REC, RAK & RAQ model radios. The model number is indicated on the face of the radio. • If the vehicle is equipped with both satellite radio and rear seat entertainment (RSE), one of these devices will have to be disconnected. • If the vehicle is equipped with a single disc CD player (Model: REF) that also has satellite radio, the satellite radio will have to be disconnected. The REF model radio does not support RSE therefore you do not have the option of emulating it.
DEI 050204 Boom Mat Sound Damping Material with Adhesive Backing, 12" x 12.5" x 2mm (Pack of 8)
Brand: Design Engineering
Boom Mat is a high quality, simple, and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface. Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and its strong adhesive backing is unaffected by extreme hot and cold temperatures. It can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Use as a first layer for areas with contours and bends for vibration damping needs. Available in a variety of sizes for a cost effective installation.
Solid State Relay, Puck Style, Input Voltage 3-32 VDC, Max Input Volts 32 VDC, Min Input Volts 3 VDC, Voltage Output 48-480 VAC, Min Output Volts 48 VAC, Max Output Volts 480 VAC, Max Output w/Heat Sink 25 A, Case Color Gray, Standards cULus, CSA , CE, Includes Finger Safe Cover
Dynamat 11103 Dynaliner 32" x 54" x 1/2" Thick Self-Adhesive Sound Deadener
Dynaliner is the perfect ultra-lightweight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available on a single layer synthetic foam-type material. Dynaliner isn't affected b
Manufacturer: Sound Around
A great sound system needs a great capacitor: a high-demand audio setup can often place extra demand on your car’s electrical system. When you need power, especially for booming bass and soaring highs, this 5.0 farad Pyle capacitor will have it at the ready. And it’s got all you need to make sure your system sounds awesome and stays safe: a blue digital voltage readout to show you how much power is available, electronic polarity protection, and an over voltage protection circuit. And this won’t just make your system sound great – it looks great too, thanks to the blue LED lighting and the brushed aluminum case. Includes clear Lucite brackets and mounting hardware for easy installation.