Loctite Gasket Maker 518 Flange Sealant is a non-corrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out-of-stock.
Versachem Super Blue Silicone is a high performance gasketing material that cures into a strong silicone rubber that is excellent for filling, sealing, bonding or weatherproofing. This moisture curing silicone maintains long term durability and flexibility, resists aging and weathering, and will not harden, shrink or crack. Works best on gaskets on valve covers, water pumps, oil pans, rear end covers, and thermostats. The OEM (Original Equipment Manufacturer) approved formula is low volatile, oxygen sensor safe, and resistant to oil, water and antifreeze mixtures. Tensile strength up to 500 psi (intermittent), with a temperature range of -65F to 400F (continuous) and -65F to 600F (intermittent).
Loctite 565 Controlled Strength Thread Sealant is formulated specifically for metal, tapered pipe thread fittings. Loctite 565 replaces most tapes and pipe dopes. Cures rapidly to withstand 10,000 psi. Perfect as a replacement for pre-coated parts. Typical Applications: Stainless steel fittings, head bolts into through holes, oil psi- sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings.
Loctite 592 PST locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids, and diesel fuels. Lubricates threads for easy assembly and disassembly. Won't shred or wear like other tape. Parts may be repositioned up to 24 hours after application. Works to 400 degrees F. Suggested applications: Head bolts into through holes, oil psi sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake and power steering fittings.
Loctite 37480 272 Red High Temperature Threadlocker Bottle, 36-milliliter
Threadlocker 272 withstands temperatures to 450 degrees Fahrenheit. This high temperature/high strength, red threadlocker is formulated for heavy-duty applications. Prevents bolts up to 1-1/2 inch (38 millimeter) from loosening due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance applications where extreme temperature resistance is required. Removable with heat and hand tools. Typical applications include camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads, ring gear and shock bolts.
Loctite 38656 277 Red Large Threads Threadlocker Bottle, 36-milliliter
Loctite Threadlocker 277 is a high strength adhesive for locking and sealing large bolts and studs 1" (25 mm) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled. Typical applications include frame brackets, suspension fasteners, shock absorber mounts, wheel studs.
Permatex Anaerobic Gasket Maker is designed primarily for use on aluminum, iron, and steel flanged mating surfaces. This non-corrosive gasketing material is ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015 inches and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife. Suggested applications include water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, and o-ring replacement.
LOCTITE 5699 Grey Flange Sealant, High Performance RTV Silicone Gasket Maker is a one part RTV silicone that remains flexible and withstands high vibration. Designed for high-torque applications. Withstands temperatures from -75°F to 625°F (-59°C to 329°C) intermittent. Outstanding oil and shop fluid resistance. Non-corrosive, low odor.
12 Pack Permatex 81160 High-Temp Red RTV Silicone Gasket Maker - 3 oz Tube (26B)
Manufacturer: PERMATEX INC
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable "formed-in-place" gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker. Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans