Color: Hilift Base
The Hi-Lift Jack Off-Road Base is designed to alleviate jack sinkage on soft surfaces. THe Off-Road Base is compatible with all Hi-Lift jacks. Newly designed, the Off-Road Base includes serrated teeth along one side of the base. These teeth allow the user to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. A clean, flat surface gives the Off-Road Base better footing and greater stability during the lifting process. A drilled hole in the center of the base allows the Off-Road Base to be attached to a Hi-Lift jack bar for storage when not in use, using an owner supplied 5/16 inch x 4 inch bolt and wing nut. Molded in high visibility red, making it harder to leave behind when the task is completed.
Astro Pneumatic's 7868 Master Ball Joint Adapter Set Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997. Works on press-fit upper and lower ball joints. The set also includes live center forcing screw plug and a blow molded carrying case.
Kester ""44"" 60/40 Solder Rosin ""44"" Is A High Activity Ra Core Flux Designed For Excellent Instant Wetting Action, Even On Nickel Surfaces. Although ""44"" Is A Ra-Based Material, The Residues Are Non-Corrosive If Not Cleaned. Per J-Std-004, ""44"" Is Classified As Rom1 Flux.• Type: Wire• Alloy: 60/40 (60% Tin, 40% Lead)• Description/Function: Wire Solder• Diameter: 0.031" (1.57 Mm)• Core Size: 66• Contains Lead: Yes• Package Type: Spool• Weight: 1 Lb Also Available In Diameter Size 0.062"".
600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10-foot (3m) drop. The T5 meets safety category: UL, CSA, CE, VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD display. AC current accuracy: +/- 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. (2)AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.
Camco 44561 Olympian Aluminum Stack Jack Stand - 2 pack
Camco Olympian RV Aluminum Stack Jack Stands are designed to get secure and level RV positioning and stability. It is made from cast aluminum and can support up to 6000 lbs. These Jack Stands extend up to 17" and are easy to use.
Recommended for spray paint applications, with maintenance free design for convenience Designed to be truly maintenance free style respirator which is discarded when the organic vapor cartridges are spent
Garage style inflation gun, chuck & gauge, clip design enables hands-free use of chuck, built-in relief valve reduces pressure in over-inflated tires. "The MP600000AV is a great value--combining 3 tools in 1 compact and easy-to-use design: an inflation gun, chuck and gauge. Used with your air compressor this deluxe tire inflation gun helps you to achieve proper tire inflation, which results in better gas mileage and optimal tire life! A hands-free chuck design makes this inflation gun easy to connect. Simply squeeze the clip and position the chuck over any Schrader-type tire valve; release the clip to lock the hands-free chuck into place. The flexible hose helps you maneuver the chuck more easily into wheel wells and other tight spaces. Moreover, the large gauge (measuring up to 150 PSI) is easy to read at 2 inches in diameter. Pull the trigger on the inflation gun and you’re inflating. Easy, peasy! But wait, there’s more: the inflation gun features a side relief valve for bleeding off air and reducing pressure in over-inflated tires and, ultimately, helping you zero-in on that proper inflation spec. Now, you’re ready to roll! Because routine pressure checks can help extend the life of your tires, investing in a tool like the MP6000 is a smart choice. Not only will the MP6000 help you save time and money, but it will also help protect the environment by optimizing your gas mileage, and it will even help make your vehicle safer to drive. Campbell Hausfeld makes it easier for you to finish your projects like a pro. The company's history of creating quality products began in 1836, when it manufactured horse-drawn wagons and agricultural equipment. Today, the company offers a complete line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert."
Pro-Lift C-3001 Pneumatic Chair with 300 lbs Capacity – Black / Red
Brand: Pro Lift
Pro Lift C-3001 Pneumatic Chair is the pneumatic chair that gives you the ability to adjust to the desired height to allow you to get work efficiently where you want in your work space. It gives you the ability to adjust the height from 15 to 20 inches. The range of motion is stable at any height underneath the durable reinforced steel and 5 swivel casters. There is the built - in tool tray to keep your tools close by when you move around the garage to provide you with the convenience to get the job done. In addition, the reinforced vinyl covered cushion provides you with the added comfort. - 15 to 20 Inches Adjustable Height - Convenient Tool Tray - 5 Heavy Duty 360 Degree Swivel Casters - Reinforced Vinyl Covered Cushion Provides Added Comfort Specifications - Capacity: 300 Lbs - Adjustable Height: 15 to 20 inch - Casters: 4 pcs - Item Weight: 13 Lbs Pro Lift C-3001 Pneumatic Chair is backed by 90 Days warranty from the date of the purchase.
Schumacher SE-5212A 2/10/50 Amp Automatic Handheld Battery Charger
Color: Black & Silver
This automatic handheld battery charger is completely automatic and offers 50-, 10-, and 2-amp charging modes. The LED indicators make it easy to check charging status at a glance. Its 50-amp mode helps engines with emergency starting, while the 10-amp fast-charging mode can recharge a battery in 3 to 5 hours. The 2-amp trickle charge mode charges a small 12-volt battery in 2 to 12 hours.