Techron Concentrate Plus is a premium fuel system cleaner trusted and recommended by many automakers to help restore lost fuel economy and performance. Its patented polyether amine (PEA) technology is unsurpassed as cleaning deposits from intake valves, fuel injectors, and combustion chambers. It is safe and effective to use in all ethanol fuels, including flex fuel like E85.
Cleans, restores, protects the entire fuel system (fuel injectors, carburetors, intake valves and combustion chambers)
Restores: lost power, acceleration, lost fuel economy, and operation of the fuel gauge sensor
Reduces: rough idle, engine surge, hesitation, and spark plus fouling
Improves: cold start performance, and fuel stability for up to one year
Automobiles and trucks use every 3,000 miles or at your next oil change. All other gasoline engines use as needed (motorcycles, dirt bikes, boats, ATVs, RVs, water craft, lawn care, etc.)
Product Information Specifications for Chevron 65740 Techron Concentrate Plus Fuel System Cleaner - 20 oz. Below:
Genuine Ford Fluid PM-3 Carburetor Tune-Up Cleaner - 16 fl. oz.
It can also be used with great effect to restore tune to carburetors if these have become blocked, stuck, or dirty. When sprayed into the air intake this product cleans all parts of the inlet system, carburetors, port areas and inlet valves. In these areas it is most effective in keeping vital parts moving, and passages clear of gums and deposits, so a smooth system of air flow can be maintained. This is vital because even slight surface roughness from deposits can ruin tuning and cause power losses.
Oil-Dri I05000-G60 Quicksorb Fine Granular Clay Absorbent Bucket, 20 lbs
Manufacturer: Oil-Dri Corporation of America
Made from the same high-quality material as our premium absorbent, Oil-Dri quick-sorb has been specially processed for greater absorption power. Smaller granules offer more surface area and allow Oil-Dri quick-sorb to absorb up to twice as much liquid per pound as conventional floor absorbents, so you can use half as much. Use on a variety of spills, including oil, grease and water. Issues that you might come across such as Potential safety hazards are present where leaks, drips, sprays or spills are most likely to occur. The solution is to develop a spill control plan with absorbent products readily available to control daily leaks and spills around your garage or plant to use in case of an emergency.
CRC QD contact cleaner is a unique blend of petroleum-distillates and alcohol which provides a suitable precision cleaner for sensitive electronics. QD contact cleaner is a cost effective alternative to all contact cleaners. QD contact cleaner Evaporates quickly and leaves no residue and is safe to use on all plastics. Recommended for the cleaning of telephones, PCs, edge connectors, tape heads, buss bars and circuits. Effectively removes dirt, dust, light oils and fingerprints from contacts, printed circuit boards, switches and breakers. NSF certified. RoHS compliant.
Tufoil Truck Engine Treatment is specially packaged in a handy 50 oz. size container for the heavy-duty engine with a 25-32 quart crankcase capacity. Tufoil Truck Engine Treatment is added to your clean oil at the time of the oil change. It will provide the motor oil with the performance enhancement needed to make the engine start easier, run cooler, produce more horsepower, increase gas mileage and ultimately extend the life of the engine. Large diesel trucks are expensive to run and very costly to repair. One of the money-saving benefits of using Tufoil Truck Engine Treatment is less repair bills. Based on the Tufoil technology, it is considered "The World's Most Efficient lubricant." Engines that run efficiently need less repair, use less gas and ultimately, the engine will last a whole lot longer.
Berryman CChem-Dip Professional Parts Cleaner quickly removes gum, varnish, sludge, hard carbon, paint, enamel and grease without heat or agitation. Used for cleaning carburetor and transmission components, cylinder heads, valves and other hard-to-clean engine parts.
Gunk CC3K Carburetor & Parts Cleaner with Drip Basket - 96 fl. oz.
Radiator Specialty's Gunk Carburetor Parts Cleaner Complete Kit is a unique product for a few reasons. One, it comes with a drip basket, which is specifically geared toward those who prefer a hands-on approach when cleaning small engine parts. Second, the solvent included in the kit is not limited to auto use; it can clean metal parts in your home, garage or shop. It removes carbon, grease, oil, varnish, paint and grime deposits. Its formula is non-corrosive, non-chlorinated, contains no ozone depleters, phenols or cresylics. And third, Radiator Specialty's Gunk Carburetor Parts Cleaner Complete Kit is designed to diminish and remove adverse environmental characteristics. Surely anyone can appreciate that, especially when it comes to car parts.
518 Gasket Eliminator (R) Flange Sealant Forms a flexible, solvent-resistant seal that will not tear or decay. Seals to 300 DegreesF and fills gaps to 0.050". Can be used on flexible metal assemblies including aluminum surfaces. Easy disassembly and cleaning.